Tactical Cowboy Collaboration Products
-
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product page
Tactical Cowboy Plate Carrier
from: $26900
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageTactical Cowboy Patch
$2500
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageNIJ IIIA SIDE ARMOR & POUCHES
from: $17900
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pagePrime Armor Level IV (RF3) Model 1023
from: $23500
Quick View
Quick ViewNIJ III+ (RF2) Model 3812 Lightweight
from: $45000
*Sold Individually, Select Qty 2 For A Pair
Fit
Our III+ MODEL 3812 plate is a very good choice for those who are looking for high level of protection on a low weight and stoppage capability. It can be used in a low profile plate carrier and it’s a great option for both males and females as its anatomic curvature serves to provide best comfortability and protection from small to medium size rifle ammunition, even against armor penetrator options.
Capabilities
Since this plate is multi-hit rated you can expect it to protect you from 9mm to 7.62×54 (LPS) including M855 rounds. Backface deformation is a very important factor that everyone should know about because even if a bullet does not penetrate the plate, you will still feel the kinetic energy and can still cause bodily damage or harm on impact. Keep in mind that we test all of our armor to the maximum standards or so-called “worst case scenario” situation and BFD (backface deformation) on model is highly common as with any other different body armor. This is why we offer an additional IIIA soft armor plate as a backer which can be inserted separately in our Prime Warrior Plate Carrier 3.0.
from: $45000 Quick ViewNIJ III+ (RF2) Model 3812 Lightweight
from: $45000
*Sold Individually, Select Qty 2 For A Pair
Fit
Our III+ MODEL 3812 plate is a very good choice for those who are looking for high level of protection on a low weight and stoppage capability. It can be used in a low profile plate carrier and it’s a great option for both males and females as its anatomic curvature serves to provide best comfortability and protection from small to medium size rifle ammunition, even against armor penetrator options.
Capabilities
Since this plate is multi-hit rated you can expect it to protect you from 9mm to 7.62×54 (LPS) including M855 rounds. Backface deformation is a very important factor that everyone should know about because even if a bullet does not penetrate the plate, you will still feel the kinetic energy and can still cause bodily damage or harm on impact. Keep in mind that we test all of our armor to the maximum standards or so-called “worst case scenario” situation and BFD (backface deformation) on model is highly common as with any other different body armor. This is why we offer an additional IIIA soft armor plate as a backer which can be inserted separately in our Prime Warrior Plate Carrier 3.0.
Select options This product has multiple variants. The options may be chosen on the product pageNIJ III+ (RF2) Model 3812 Lightweight
from: $45000
*Sold Individually, Select Qty 2 For A Pair
Fit
Our III+ MODEL 3812 plate is a very good choice for those who are looking for high level of protection on a low weight and stoppage capability. It can be used in a low profile plate carrier and it’s a great option for both males and females as its anatomic curvature serves to provide best comfortability and protection from small to medium size rifle ammunition, even against armor penetrator options.
Capabilities
Since this plate is multi-hit rated you can expect it to protect you from 9mm to 7.62×54 (LPS) including M855 rounds. Backface deformation is a very important factor that everyone should know about because even if a bullet does not penetrate the plate, you will still feel the kinetic energy and can still cause bodily damage or harm on impact. Keep in mind that we test all of our armor to the maximum standards or so-called “worst case scenario” situation and BFD (backface deformation) on model is highly common as with any other different body armor. This is why we offer an additional IIIA soft armor plate as a backer which can be inserted separately in our Prime Warrior Plate Carrier 3.0.
Quick View
Select options This product has multiple variants. The options may be chosen on the product pagePRIME ARMOR NIJ LEVEL III 3.0 (RF1) LIGHTWEIGHT EDITION
from: $43000
Ballistic Capabilities:
7.62×51 M80 [147 GR FMJ] AT 2845 FPS
7.62×51 NATO [175 GR HP] AT 2530 FPS
5.56×45 M193 [55GR FMJ] AT 3215 FPS
7.62×39 [124 GR MSC] AT 2435 FPS
7.62×39 [124 GR FMJ] AT 2430 FPS
Quick View
Quick View3-Mag Prime Warrior Placard
$7000
3-Mag Prime Warrior Placard
The 3-Mag Warrior Placard offers an efficient solution for carrying AR-style rifle magazines. Build in tourniquet sleeve provides additional feature to this placard without need to buy TQ sleeve separately. The back is all hook to maximize it’s grip onto your plate carrier’s required loop field.
$7000 Quick View3-Mag Prime Warrior Placard
$7000
3-Mag Prime Warrior Placard
The 3-Mag Warrior Placard offers an efficient solution for carrying AR-style rifle magazines. Build in tourniquet sleeve provides additional feature to this placard without need to buy TQ sleeve separately. The back is all hook to maximize it’s grip onto your plate carrier’s required loop field.
Select options This product has multiple variants. The options may be chosen on the product page3-Mag Prime Warrior Placard
$7000
3-Mag Prime Warrior Placard
The 3-Mag Warrior Placard offers an efficient solution for carrying AR-style rifle magazines. Build in tourniquet sleeve provides additional feature to this placard without need to buy TQ sleeve separately. The back is all hook to maximize it’s grip onto your plate carrier’s required loop field.
Quick View
Quick View3-6 Mags Prime Warrior Placard
from: $6000
Prime Warrior Placard is a perfect addon to your gear if you’re looking to maximize your loadout. Each individual magazine slot is able to take up to magazines 5.56×45, and 7.62×39 it will also accept one magazine on .308. Magazine slots are wide enough to accept medium size radios like APX 7000.
from: $6000 Quick View3-6 Mags Prime Warrior Placard
from: $6000
Prime Warrior Placard is a perfect addon to your gear if you’re looking to maximize your loadout. Each individual magazine slot is able to take up to magazines 5.56×45, and 7.62×39 it will also accept one magazine on .308. Magazine slots are wide enough to accept medium size radios like APX 7000.
Select options This product has multiple variants. The options may be chosen on the product page3-6 Mags Prime Warrior Placard
from: $6000
Prime Warrior Placard is a perfect addon to your gear if you’re looking to maximize your loadout. Each individual magazine slot is able to take up to magazines 5.56×45, and 7.62×39 it will also accept one magazine on .308. Magazine slots are wide enough to accept medium size radios like APX 7000.
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageMulti size NIJ Level IIIA (HG2) Body Armor
from: $5170
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageTourniquet Sleeve
$1500
All Hand Gun Rated Products
-
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product page
Tactical Gray Man Kit
from: $22900
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageTactical Gray Man Kit (XL)
from: $25900
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pagePrime Duty Carrier & Armor
from: $84500
Quick ViewAdd to cartCustom Tracing Kit
$1800
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageNIJ Certified IIIA Soft Body Armor Inserts (SA3000)
from: $55480
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageNIJ IIIA/HG2 Soft Armor Inserts (PA3300)
from: $44640
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pagePrime Armor E-MBAV Soft Armor NIJ IIIA/HG2
from:
$40000$34500Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageNIJ IIIA SIDE ARMOR & POUCHES
from: $17900
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageARGUS MTS Level IIIA Shield
from: $2,82500
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pagePROTECTOR IIIA (HG2) CONCEALABLE CARRIER AND ARMOR
from: $62500
Quick View
Quick ViewNIJ IIIA (HG2) COVERT FEMALE BODY ARMOR AND CARRIER
from: $50000
- Available in sizes: XS, S, M, L & XL (SIZE CHART)
- Armor Levels: Standard (Level IIIA)
- Washable outer layer
- Large adjustable straps
- Nylon and spandex mixed with stretch
- Water wicking draws moisture away from the body
- Breathable spacer mesh for ultimate comfort
- DWR antimicrobial coating with odor control
- Made in the USA
SLEEK UNDERCOVER VITAL PROTECTION
It is legal for anyone to purchase or wear body armor except convicted felons. Purchasing armor from Prime Armor is done under the agreement that you will not use our products for any criminal use or allow anyone to do so.
Ballistic Capabilities
9 MM [124GR HP] AT 1029 FPS 357 MAG [158GR JHP] AT 1205 FPS 9 MM +P [55GR CIVIL DEFENCE] AT 2150 FPS 40 S&W [125GR JHP] AT 1350 FPS 357 SIG [125GR FMJ] AT 1350 FPS .45 CAL [154GR] AT 1350 FPS 357 SIG [125GR HP] AT 1350 FPS .44 MAG [240GR SJHP] AT 1150 FPS from: $50000 Quick ViewNIJ IIIA (HG2) COVERT FEMALE BODY ARMOR AND CARRIER
from: $50000
- Available in sizes: XS, S, M, L & XL (SIZE CHART)
- Armor Levels: Standard (Level IIIA)
- Washable outer layer
- Large adjustable straps
- Nylon and spandex mixed with stretch
- Water wicking draws moisture away from the body
- Breathable spacer mesh for ultimate comfort
- DWR antimicrobial coating with odor control
- Made in the USA
SLEEK UNDERCOVER VITAL PROTECTION
It is legal for anyone to purchase or wear body armor except convicted felons. Purchasing armor from Prime Armor is done under the agreement that you will not use our products for any criminal use or allow anyone to do so.
Ballistic Capabilities
9 MM [124GR HP] AT 1029 FPS 357 MAG [158GR JHP] AT 1205 FPS 9 MM +P [55GR CIVIL DEFENCE] AT 2150 FPS 40 S&W [125GR JHP] AT 1350 FPS 357 SIG [125GR FMJ] AT 1350 FPS .45 CAL [154GR] AT 1350 FPS 357 SIG [125GR HP] AT 1350 FPS .44 MAG [240GR SJHP] AT 1150 FPS Select options This product has multiple variants. The options may be chosen on the product pageNIJ IIIA (HG2) COVERT FEMALE BODY ARMOR AND CARRIER
from: $50000
- Available in sizes: XS, S, M, L & XL (SIZE CHART)
- Armor Levels: Standard (Level IIIA)
- Washable outer layer
- Large adjustable straps
- Nylon and spandex mixed with stretch
- Water wicking draws moisture away from the body
- Breathable spacer mesh for ultimate comfort
- DWR antimicrobial coating with odor control
- Made in the USA
SLEEK UNDERCOVER VITAL PROTECTION
It is legal for anyone to purchase or wear body armor except convicted felons. Purchasing armor from Prime Armor is done under the agreement that you will not use our products for any criminal use or allow anyone to do so.
Ballistic Capabilities
9 MM [124GR HP] AT 1029 FPS 357 MAG [158GR JHP] AT 1205 FPS 9 MM +P [55GR CIVIL DEFENCE] AT 2150 FPS 40 S&W [125GR JHP] AT 1350 FPS 357 SIG [125GR FMJ] AT 1350 FPS .45 CAL [154GR] AT 1350 FPS 357 SIG [125GR HP] AT 1350 FPS .44 MAG [240GR SJHP] AT 1150 FPS Quick View
Select options This product has multiple variants. The options may be chosen on the product pagePersonal Armor System™
$1,25000
Package included:
- Neck Protection
- Shoulder Protection
- Groin Protection (XL)
- Back Protection (can be transferred to seat with a removable pad)
- Thigh Protection
PLATE CARRIER MUST BE PURCHASED SEPARATELY!
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pagePrime Armor NIJ IIIA Groin Protection
from: $19500
Quick ViewSale!
Quick ViewAtlas Ballistic Helmet Level IIIA
$59900$58500The ARCH helmet begin life in Switzerland as raw Kevlar fibers from DuPont. They are converted to Aramid layers by Europes’ premier textiles research and innovation center Saati S.p.A. in Italy before pressing into the shell we know and trust.
We use a proprietary pre-preg lamination process which allows us to make a multi-hit ballistic helmet that is extremely durable at a lower weight.
The ARCH helmet weighs only L(2.97 lbs), XL(3.06 lbs) for the complete helmet system. This makes the ARCH helmet, one of the lightest aramid ballistic helmets on the market. The superior weight-to-protection ratio allows for a greater mobility during use without sacrificing the ballistic performance.
$59900$58500 Quick ViewAtlas Ballistic Helmet Level IIIA
$59900$58500The ARCH helmet begin life in Switzerland as raw Kevlar fibers from DuPont. They are converted to Aramid layers by Europes’ premier textiles research and innovation center Saati S.p.A. in Italy before pressing into the shell we know and trust.
We use a proprietary pre-preg lamination process which allows us to make a multi-hit ballistic helmet that is extremely durable at a lower weight.
The ARCH helmet weighs only L(2.97 lbs), XL(3.06 lbs) for the complete helmet system. This makes the ARCH helmet, one of the lightest aramid ballistic helmets on the market. The superior weight-to-protection ratio allows for a greater mobility during use without sacrificing the ballistic performance.
Select options This product has multiple variants. The options may be chosen on the product pageAtlas Ballistic Helmet Level IIIA
$59900$58500The ARCH helmet begin life in Switzerland as raw Kevlar fibers from DuPont. They are converted to Aramid layers by Europes’ premier textiles research and innovation center Saati S.p.A. in Italy before pressing into the shell we know and trust.
We use a proprietary pre-preg lamination process which allows us to make a multi-hit ballistic helmet that is extremely durable at a lower weight.
The ARCH helmet weighs only L(2.97 lbs), XL(3.06 lbs) for the complete helmet system. This makes the ARCH helmet, one of the lightest aramid ballistic helmets on the market. The superior weight-to-protection ratio allows for a greater mobility during use without sacrificing the ballistic performance.
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageBallistic Motorcycle Jacket Insert
from: $14500
Quick ViewAdd to cartNIJ IIIA (GH2) Ballistic Knee Inserts (pair)
Original price was: $28900.$20000Current price is: $20000.
Quick View
Quick ViewPrime Armor NIJ IIIA Speed Plate
from: $8900
- Lightweight: 1.2 lbs
- Size: 9.5″x12.5″
- Thickness: 0.3″
- Defends against handguns, shotguns, strikes, and stabs
- Multicurve
- Outstanding blunt force ratings
- Excellent multi-hit capabilities
- Water and oil resistant
- Hard plate
- Polyurea coating
- Made in the USA
Protection Level
Prime Armor Speed Plate is NIJ IIIA rated and will stop a variety of 9mm, 357 sig, 357 mag, 40 S&W up to 44 mag.
Ballistic Capabilities
9 MM [124GR HP] AT 1029 FPS 5.7 x 28mm SS195, Lead Free Hollow Point (LFHP) 9 MM +P [55GR CIVIL DEFENCE] AT 2150 FPS 40 S&W [125GR JHP] AT 1350 FPS 357 SIG [125GR FMJ] AT 1350 FPS .45 CAL [154GR] AT 1350 FPS 357 SIG [125GR HP] AT 1350 FPS .44 MAG [240GR SJHP] AT 1150 FPS Created for Law Enforcement will Serve Everyone!
Speed Plate is a great option for those who want to achieve the highest level of protection against handguns, shotguns, and stabs. Due to the multi-curve construction plate is very comfortable to wear even during long hours.
from: $8900 Quick ViewPrime Armor NIJ IIIA Speed Plate
from: $8900
- Lightweight: 1.2 lbs
- Size: 9.5″x12.5″
- Thickness: 0.3″
- Defends against handguns, shotguns, strikes, and stabs
- Multicurve
- Outstanding blunt force ratings
- Excellent multi-hit capabilities
- Water and oil resistant
- Hard plate
- Polyurea coating
- Made in the USA
Protection Level
Prime Armor Speed Plate is NIJ IIIA rated and will stop a variety of 9mm, 357 sig, 357 mag, 40 S&W up to 44 mag.
Ballistic Capabilities
9 MM [124GR HP] AT 1029 FPS 5.7 x 28mm SS195, Lead Free Hollow Point (LFHP) 9 MM +P [55GR CIVIL DEFENCE] AT 2150 FPS 40 S&W [125GR JHP] AT 1350 FPS 357 SIG [125GR FMJ] AT 1350 FPS .45 CAL [154GR] AT 1350 FPS 357 SIG [125GR HP] AT 1350 FPS .44 MAG [240GR SJHP] AT 1150 FPS Created for Law Enforcement will Serve Everyone!
Speed Plate is a great option for those who want to achieve the highest level of protection against handguns, shotguns, and stabs. Due to the multi-curve construction plate is very comfortable to wear even during long hours.
Select options This product has multiple variants. The options may be chosen on the product pagePrime Armor NIJ IIIA Speed Plate
from: $8900
- Lightweight: 1.2 lbs
- Size: 9.5″x12.5″
- Thickness: 0.3″
- Defends against handguns, shotguns, strikes, and stabs
- Multicurve
- Outstanding blunt force ratings
- Excellent multi-hit capabilities
- Water and oil resistant
- Hard plate
- Polyurea coating
- Made in the USA
Protection Level
Prime Armor Speed Plate is NIJ IIIA rated and will stop a variety of 9mm, 357 sig, 357 mag, 40 S&W up to 44 mag.
Ballistic Capabilities
9 MM [124GR HP] AT 1029 FPS 5.7 x 28mm SS195, Lead Free Hollow Point (LFHP) 9 MM +P [55GR CIVIL DEFENCE] AT 2150 FPS 40 S&W [125GR JHP] AT 1350 FPS 357 SIG [125GR FMJ] AT 1350 FPS .45 CAL [154GR] AT 1350 FPS 357 SIG [125GR HP] AT 1350 FPS .44 MAG [240GR SJHP] AT 1150 FPS Created for Law Enforcement will Serve Everyone!
Speed Plate is a great option for those who want to achieve the highest level of protection against handguns, shotguns, and stabs. Due to the multi-curve construction plate is very comfortable to wear even during long hours.
Quick View
Quick View5.11 RUSH 24 NIJ IIIA BACKPACK ARMOR
from: $14000
BODY ARMOR FEATURES:
- Multi-hit rated – Stops at least 6 rounds
- Advanced protection – Stops 5.7×28 rounds in IIIA+ option
- Ultra-thin design – 0.3″ profile for discreet wear
- Coating – Durable 500D Codura in NAVY Blue color
- Lightweight – 10×15 size weighs only 1.5 lbs
- Warranty – 5 years and 7 years for IIIA+ option
- TSA approved – Can be carried on aircraft
- Proudly made in Houston, TX
- Berry Compliant – 100% made in the USA
from: $14000 Quick View5.11 RUSH 24 NIJ IIIA BACKPACK ARMOR
from: $14000
BODY ARMOR FEATURES:
- Multi-hit rated – Stops at least 6 rounds
- Advanced protection – Stops 5.7×28 rounds in IIIA+ option
- Ultra-thin design – 0.3″ profile for discreet wear
- Coating – Durable 500D Codura in NAVY Blue color
- Lightweight – 10×15 size weighs only 1.5 lbs
- Warranty – 5 years and 7 years for IIIA+ option
- TSA approved – Can be carried on aircraft
- Proudly made in Houston, TX
- Berry Compliant – 100% made in the USA
Select options This product has multiple variants. The options may be chosen on the product page5.11 RUSH 24 NIJ IIIA BACKPACK ARMOR
from: $14000
BODY ARMOR FEATURES:
- Multi-hit rated – Stops at least 6 rounds
- Advanced protection – Stops 5.7×28 rounds in IIIA+ option
- Ultra-thin design – 0.3″ profile for discreet wear
- Coating – Durable 500D Codura in NAVY Blue color
- Lightweight – 10×15 size weighs only 1.5 lbs
- Warranty – 5 years and 7 years for IIIA+ option
- TSA approved – Can be carried on aircraft
- Proudly made in Houston, TX
- Berry Compliant – 100% made in the USA
Quick View
Quick View5.11 SKYWEIGHT NIJ IIIA BALLISTIC ARMOR INSERT
from: $12000
BODY ARMOR FEATURES:
- Flexible
- Engineered with the strongest materials sourced in the USA
- Minimum 5 years warranty for Ballistic Components, 7 years for IIIA+
- Multi-Hit capable
- 0.4” Thick Profile
- Ultra-high-molecular-weight polyethylene (UHMWPE) plus Aramid Material
- Durable liquid-resistant coating
- Customization available (we can cut panels in any shape if you need customization let us know)
- Made in Texas, USA
from: $12000 Quick View5.11 SKYWEIGHT NIJ IIIA BALLISTIC ARMOR INSERT
from: $12000
BODY ARMOR FEATURES:
- Flexible
- Engineered with the strongest materials sourced in the USA
- Minimum 5 years warranty for Ballistic Components, 7 years for IIIA+
- Multi-Hit capable
- 0.4” Thick Profile
- Ultra-high-molecular-weight polyethylene (UHMWPE) plus Aramid Material
- Durable liquid-resistant coating
- Customization available (we can cut panels in any shape if you need customization let us know)
- Made in Texas, USA
Select options This product has multiple variants. The options may be chosen on the product page5.11 SKYWEIGHT NIJ IIIA BALLISTIC ARMOR INSERT
from: $12000
BODY ARMOR FEATURES:
- Flexible
- Engineered with the strongest materials sourced in the USA
- Minimum 5 years warranty for Ballistic Components, 7 years for IIIA+
- Multi-Hit capable
- 0.4” Thick Profile
- Ultra-high-molecular-weight polyethylene (UHMWPE) plus Aramid Material
- Durable liquid-resistant coating
- Customization available (we can cut panels in any shape if you need customization let us know)
- Made in Texas, USA
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageNIJ IIIA EBERLESTOCK FADE SLING ARMOR INSERT
from: $13500
Quick ViewQuick View5.11 COVRT 18 NIJ IIIA BACKPACK ARMOR
from: $14500
BODY ARMOR FEATURES:
- Multi-hit rated – Stops at least 6 rounds
- Advanced protection – Stops 5.7×28 rounds in IIIA+ option
- Ultra-thin design – 0.3″ profile for discreet wear
- Coating – Durable 500D Codura in NAVY Blue color
- Lightweight – 11”x16.5″ weighs only 1.75 lbs
- Warranty – 5 years and 7 years for IIIA+ option
- TSA approved – Can be carried on aircraft
- Proudly made in Houston, TX
- Berry Compliant – 100% made in the USA
from: $14500 Quick View5.11 COVRT 18 NIJ IIIA BACKPACK ARMOR
from: $14500
BODY ARMOR FEATURES:
- Multi-hit rated – Stops at least 6 rounds
- Advanced protection – Stops 5.7×28 rounds in IIIA+ option
- Ultra-thin design – 0.3″ profile for discreet wear
- Coating – Durable 500D Codura in NAVY Blue color
- Lightweight – 11”x16.5″ weighs only 1.75 lbs
- Warranty – 5 years and 7 years for IIIA+ option
- TSA approved – Can be carried on aircraft
- Proudly made in Houston, TX
- Berry Compliant – 100% made in the USA
Select options This product has multiple variants. The options may be chosen on the product page5.11 COVRT 18 NIJ IIIA BACKPACK ARMOR
from: $14500
BODY ARMOR FEATURES:
- Multi-hit rated – Stops at least 6 rounds
- Advanced protection – Stops 5.7×28 rounds in IIIA+ option
- Ultra-thin design – 0.3″ profile for discreet wear
- Coating – Durable 500D Codura in NAVY Blue color
- Lightweight – 11”x16.5″ weighs only 1.75 lbs
- Warranty – 5 years and 7 years for IIIA+ option
- TSA approved – Can be carried on aircraft
- Proudly made in Houston, TX
- Berry Compliant – 100% made in the USA
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageVIKTOS UPSCALE SLING BAG 3 NIJ IIIA ARMOR INSERT
from: $9500
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageVIKTOS UPSCALE SLING BAG XL NIJ IIIA ARMOR INSERT
$16500
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageVIKTOS PERIMETER 25 LEVEL IIIA BACKPACK ARMOR
from: $13500
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageVIKTOS PERIMETER 40 LEVEL IIIA BACKPACK ARMOR
from: $13500
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageNIJ IIIA Backpack Armor Insert
from: $12500
Quick ViewSelect options This product has multiple variants. The options may be chosen on the product pageMulti size NIJ Level IIIA (HG2) Body Armor
from: $5170
Why We Teamed Up with Tactical Cowboy
This collaboration was born out of mutual respect and a shared mission: build gear that actually performs in the field.
Tactical Cowboy isn’t just a brand — they’re boots-on-the-ground instructors running real training, with real people, in real situations. We knew if our gear could survive their range days, field classes, and feedback sessions, it could survive anything.
So instead of just sending plates and calling it a day, we worked together. Prime Armor brought the engineering and production muscle. Tactical Cowboy brought the field experience and brutal honesty.
The result? A plate carrier that’s minimal, mobile, and mission-ready — built by professionals, for professionals.
See it in action
